Ask Experts Questions for FREE Help !
Ask
    sfcthill's Avatar
    sfcthill Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 19, 2010, 09:51 AM
    Furnace fan won't stay on
    Hello,
    I have a Nordyne furnace in a Dbl Wide. First of the pilot would go out every time the Blower kicked on. I cleaned the gas orfice and replaced the Thermocouple. Now the Fan will only run for about 20 seconds then kick back off for a minute or so then back on. If the wife is cold, NO ONE IS HAPPY. Please help
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 19, 2010, 12:36 PM
    The below link is for mobile home furnaces. The people there are professionals in that end of the biz and might have a part if you need it. Post under Nordyne after you register to post and include your model number.

    Index page
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to wire fan to stay on low speed, but still work on normal when furnace is on. [ 3 Answers ]

I have a multispeed furnace fan GE P-8-7505 and would like to run the fan on low when the furnace is off, but still on high when the furnace is on. The furnace is a Lennox Conservator; still works very well with no issues at all. Can this be done? Thanks to anyone who has some thoughts on this.

Furnace fan always on, but heat won't stay on [ 4 Answers ]

I have an old Dynavent DNV40 natural gas furnace that when I turn the thermostat to heat, the fan will kick on but it never tries to ignite the gas. On rare occasions, it will ignite the gas, but after about 10 minutes of operating, the gas cuts off and the fan continues to blow. I replaced the...

Furnace won't stay on [ 1 Answers ]

I can't get my furnace to stay on unless I have it all the way up. I just replaced the thermostat what could be wrong

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

View more questions Search