Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Submersible well trouble shooting
[ 1 Answers ]
My water stopped working at all points checked at the tank ( I have a sub. Pump,drilled well) it still showed pressure in the tank, checked breaker it was fine. Was waiting for the morn. To call plumber and in the midddle of the night the sound of the pressure switch could be heard. Now it seems to...
Trouble shooting my T.V.
[ 1 Answers ]
I have an older model rear projection television, the video and sound both went out at the same time, anyone have an idea on what I need to change out
Trouble shooting furnace
[ 3 Answers ]
Hello I have a Altra 90 SX Armstrong furnace that has a cycle problem. The model # is a GUK75D103A with a Heatcraft control board 404030001 Cat. # 70K98 The problem that I'm actually having is that it is going through its cycles OK, except the induced fan keeps running and won't shut off. ...
Trouble shooting
[ 1 Answers ]
hi I have 1997 dodge ram 1500 4x4 my tail light went out and then the single light would . Cheeked out both. Bulbs on the right side, know the kicker is the hazzards work, the turnsignal works, if I step on the break.pleas help. Note I have replaced the turnsignal switch. still no luck.
Furnace Trouble shooting
[ 1 Answers ]
I have an Coleman Evcon Furnace. Model #15020A the problem is I replaced the Inducer motor, and The furnace starts like normal but then the flames goes out after about a minute or two. The LED light says the Pressure switch is stuck open but it seems fine. I tried to replace the PC board but can't... View more questions Search
|