Check out some similar questions!
No hot water in Kenmore 70 Series washer
[ 3 Answers ]
I just replaced the hot/cold water valve in my Kenmore 70 Series Heavy Duty Plus washer model no. 82372110. I had one wire in the wiring harness, small, left over and couldn't find where to attach it. The washer fills fine with cold water but takes in no hor water. All lines and hoses are new...
Hot water suddenly slows to stop filling bath.
[ 11 Answers ]
PROBLEM:ATTEMPTED FIX Tried bridging hot and cold with a hose (on all taps) I've even let it run for a few minutes so that water is spilling out of the overflow. I've tried turning off the cold water supply, then turning on all the hot taps to try and empty the tank, but the same thing...
My Kenmore Elite washer agitator spins while the tub is filling with water. Why?
[ 0 Answers ]
My Kenmore Elite top load washer agitator immediately starts turning when the tub is filling up with water. It never did this prior, before the tub was full with water
Kenmore he4t washer won't stop filling
[ 1 Answers ]
My Kenmore he4t washer won't stop filling even when off. Help! View more questions Search
Add your answer here.
|