Ask Experts Questions for FREE Help !
Ask
    mrpop03's Avatar
    mrpop03 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 1, 2010, 09:02 AM
    Nordyne model KG6RC 100C-20B furnace, fault code 2 blinks, how do I repair?
    I have a nordyne model KG6RC 100C-20B furnace. Woke up this morning and the blower is not coming on. The red light on the circuit board is blinking twice in a row every few seconds. I found the code which reads-2 blinks. Pressure switch is open with inducer fan on. What is the best way to repair?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 1, 2010, 10:13 AM
    Remove hose from pressure switch and make sure of no restrictions or splits in the tube. Post back with results.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Schematic for a nordyne furnace model mmha-070aahr-05 [ 2 Answers ]

Can't seem to find this schematic anywhere.any help appreciated... thanks,charlie

Goodman Furnace Model GMPN060-3 Three Blinks Diagnostics. [ 7 Answers ]

I have a Goodman Furnace Model GMPN060-3. I get three blinks biagnostic code. I changed venter (motor assembly) and pressure switch. Still the same three blinks. Moisture drain path is clean and free of debries. After the new parts, furnace started once, but would not start again -- same three...

Nordyne Model e2eb-012ha furnace/ac [ 0 Answers ]

I have a nordyne e2eb-012ha furnace/ac. The furnace is either on or off. Already replaced thermostat. Any other ideas?

Janitrol -model#gpg10300701a fault code [ 1 Answers ]

Fault code light blink one time----- if I cut off thermostat and cut on works fine. Cannot read diagram fault code not readable

Nordyne furnace: 2 blinks - pressure switch is on. [ 1 Answers ]

How do I fix this? 2 blinks - pressure switch is on... :confused:

View more questions Search