Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Plastic pipe brass fittings?
[ 6 Answers ]
Can I use brass compression fittings with 15mm plastic pipe? Thanks!
"Just for Copper" cold weld
[ 3 Answers ]
At Ace Hardware (and probably other places) there is an item called "Just For Copper" which comes in an Elmer's Glue like plastic bottle. It is a cold weld for copper pipes (brass too) under 2". I have used it in places where I am temporarily putting on an end cap on. It is easy to use since you...
Removing galv fitting from cast iron pipe
[ 4 Answers ]
What is the best way to remove a threaded stuck lead fitting from a cast iron section? The fitting was from a lead sink drain pipe and it connected to the cast pipe at the toilet elbow. I tried a pipe wrench and a hammer to try to budge it but no go. I want to thread new PVC into the section of...
Can someone please identify this PVC fitting
[ 3 Answers ]
Attached (I hope) is a picture of a fitting I am trying to identify. This fitting joins my PVC washing machine drain pipe to my copper soil pipe. I would like to know what it is called so I can buy another one without sounding like an idiot to the sales folks. Also, I am looking for application...
Plastic and Copper pipe connections
[ 1 Answers ]
Help... I am trying to replace a kitchen faucet. The copper water supply pipe is connected to a plastic shut-off valve. I want to replace the plastic shut-off valve with a metal valve. The plastic shut-off valve will not come off the copper water supply pipe. How do I get this off? I tried... View more questions Search
|