Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Leaking shower diverter valve
[ 15 Answers ]
We have a three knob shower system. When the water runs into the tub a significant amount of water runs out of the central diverter valve (?correct term) knob. When this is turned water is diverted to the shower head. How does one determine how to remove and replace the diverter assembly, or could...
Diverter valve for Moen faucet
[ 2 Answers ]
Hi, I need to replace the diverter valve (1225) on the kitchen faucet. Do I need to remove the entire faucet to do this? If so how do I do this? Thanks
New Diverter Valve not working
[ 10 Answers ]
Hi, I have read a couple of the threads on diverter valves and thought I might ask this question for some help. Ok here is the background on the problem and how we went about solving it. First this is a house that was built in 1971 so nothing new. The bathroom on the main floor has a three...
Diverter valve problem
[ 1 Answers ]
Hi All, Had a problem with the diverter valve knurled end being worn, so I changed the whole valve(Danco replacement for Sayco). With the new valve, I have low pressure & also when putting water towards the shower head, it still comes out the lower spicket. How does that happen. Thanks in...
Shower diverter valve sticking
[ 5 Answers ]
Howdy, hope someone can give me some advice on this sticky problem I'm having. Just recently the diverter knob (it's a pull-out type) has been sticking a bit, not pulling out all the way. The result is the water comes out of both the tub faucet AND the shower head, at half-pressure from both. It... View more questions Search
|