 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honeywell thermostat wiring
h
Honeywell Visionpro 8000 Wiring Instructions I now have a Carrier heat pump with electric back-up heat . I want to replace the manual stat with a Honeywell Visionpro 8000. The terminals connected on the old stat are: O/W2 R Y/Y2 G C W/W1 Can you tell me how to connect the Visionpro 8000 Model No. TH832OU1008? Terminals are: W-O/B G R Rc C Y Y2 L E |
||||
Check out some similar questions!
I have a weathertron by trANE AND I HOOKING UP A HONEYWELL PRO TH 3000 SERIES I NEED TO KNOW THE conversion of the WIRES between the two thermostat . PLEASE HELP ask if you need more imfor
Dear sir, I purchased a honeywell digital thermostat, non programmable, and replacing the honeywell mechanical. The prooblem is i used terminals g y o w2on the old the new has e aux ygolrbc,i can hook up the gyo but,where does the brown wire go.the new honeywell is for heat pump also th321od ...
I am replacing my old Honeywell (q675 subbase) with a new Honewell FocusPro TH6220D. I have a RUUD heatpump with a RUUD electric furnace. It looks as though there are some wiring differences between the old and the new one. The old thermostat had the following wires connected. X...
My son had a Honeywell Simple Comfort 3001 thermostat zapped during a thunderstorm. He purchased a Honeywell RTH230B to replace it. The 3001 had wires going to 5 terminals: RC, G, Y, W, C. The 230B has 5 terminals but two of them are bridged: RH and RC bridged, G, Y, W. Where do we connect...
I've seen similar questions, but I need exact instructions. My old thermostat is wired as follows: W-Blue wire G-Green wire R-Red wire C-White wire Y-Yellow wire New thermostat has: Rh
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
