Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Physics (Current and Parallel Forces)
[ 3 Answers ]
Hi HelpDesk: Please I need help how to figure out these problems: 1) An auto engine of mass 295Kg is located 1.0 m from one end of a 4.0 M work-bench. If the uniform bench has a mass of 45.0Kg, what weight Must each end of the bench support? 2) There is a graphic like:
Cd Rom, Cd driver, Cd writer driver
[ 1 Answers ]
I have never had any problems with this before. I used to be able to save data, music, pictures and etc on my cd writer. I tried saving some pictures that I have recently gathered with our new baby and while my wife was pregnant. So I tried everything. The writer does not do anything. Does...
Slopes,parallel and perpendicular... how do I do that?help please!
[ 2 Answers ]
okay I was given the linear equation 2x+4y=12 and I was asked to find: a.)an equation in the form y=mx+b b.)an equation of line parallel to the equation c.)a slope perpendicular to the equation d.)an equation of a line parallel & through the point (4,2) e.)an equation of a line perpendicular...
Can I use parallel thermostats in a 1-zone system?
[ 3 Answers ]
Bought an old 3-storey house in Maine, heated with gas forced-hotwater radiators. There is only 1 zone, with the thermostat in a 1st floor front room with little traffic and away from any radiator. When the t'stat calls for heat, it takes so long for it to register at the t'stat site, that the...
Parallel Thermostats
[ 3 Answers ]
I Am installing baseboard electric heat in 2 rooms in my basement on a new 20 amp 240v circuit. In the first room I'm putting 1 1500 watt heater and 1 1250 watt heater for a total of approx 11.5 amps (connected parallel). My question is this: Can I run a parallel connection from the first... View more questions Search
|