Ask Experts Questions for FREE Help !
Ask
    bigamp01's Avatar
    bigamp01 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 1, 2009, 11:35 AM
    Weathermaker 8000 furnace flashing code 13
    I have a carrier weathermaker 8000 furnace ant the blower motor comes on for ninety seconds then shuts off. The control board is flashing code 13. How do I fix this.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 1, 2009, 01:06 PM
    Look on the inside of the blower door for the blink code. It will tell you what is wrong.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

LED code 31 on a weathermaker 8000, how do I reset? [ 3 Answers ]

I tried the 3 hour automatic restet. It didn't work. Are there any other way to reset this unit?

Carrier Weathermaker 8000 - Error Code 14 [ 3 Answers ]

I have a Carrier Weathermaker 8000, model # 58WAV111-16. At the end of the winter last year, it quit igniting at all (or so I thought), and I simply let it go until the past couple weeks. I replaced the ignitor, thinking it was the issue, with the following results. The unit will ignite...

Carrier Weathermaker 8000 Error Code 24 [ 1 Answers ]

I have a Carrier 8000 Weathermaker (model # 58WAV091-16) that is displying error code 24. Any idea what this is (24 SECONDARY VOLTAGE FUSE IS OPEN Check for: - Short circuit in secondary voltage (24V) wiring and how I can fix it?

Code 31 on weathermaker 8000 [ 3 Answers ]

I have a weathermaker 8000 58wav. It will startup, induction fan on, flames on, blower on for about 80 seconds. It then shuts down the flame and the induction motor. The blower will run for a short time and off. Blinks 31. Pressure switch was Ok, Flame sensor seems Ok. I checked the chimney vent...

Carrier Weathermaker 8000 Trouble Code [ 2 Answers ]

I have a carrier Weathermaker 8000. Started up furnace and forgot to remove baffle. Now have trouble code 33 and have to manually reset. How do I accomplish this?

View more questions Search