Ask Experts Questions for FREE Help !
Ask
    StaticFX's Avatar
    StaticFX Posts: 943, Reputation: 74
    Senior Member
    		  
    #1

    Nov 27, 2009, 10:02 AM
    Clean a finished wood table
    We have an OLD dining room set. The table top has "issues". It has a "film" on it from years of pledge. Also, there are some spots that are dull. I think its mahhgany? Its dark.

    What can I do to clean it up and restore a nice shine to it?

    Thanks!
    unluckynut's Avatar
    unluckynut Posts: 294, Reputation: 23
    Full Member
    		  
    #2

    Nov 28, 2009, 06:13 PM

    I would try some steel wool on it first, It might come clean real easy, if you're lucky. When you are ready to seal it use minwax wipe on sealer. It is real easy to work with and does not smell up your house. You can't mess up with this stuff, its too easy. Good luck.
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #3

    Nov 30, 2009, 01:25 AM
    Hi, StaticFX!

    You can probably also do a "rejuvenation" finishing on it using condition-specific cleaners, perhaps a lacquer-based stain and then a low-solids lacquer like Deft. But, I would like to know more about the actual condition of the finish before describing to you how to do that.

    Could you post any images of it on this thread, please?

    Thanks!
    StaticFX's Avatar
    StaticFX Posts: 943, Reputation: 74
    Senior Member
    		  
    #4

    Jan 22, 2010, 01:19 PM

    I fogot I posted this... lol

    I'll see if I can snap a pic or two and post them

    Overall the finish is pretty good. Just some areas aren't as well off (especially on the top of the chair backs.. when peoples hands go when pulling out the chair)
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #5

    Jan 22, 2010, 02:11 PM
    Posting images would be good! I've also forgotten about some threads that I've started...

    Thanks!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Age of this dressing table original painted wood [ 2 Answers ]

This is some kind of dressing table. It is a manufactured piece but there is tons of hand work on it. I am sure in its day it was an inexpensive piece. It is pine and the top veneer was coming off. I took off and painted the top to match the rest. The paint is original. And the decorative painting...

Repairing Wood Table [ 2 Answers ]

My coffee table is 34 years old and has bcome unsteady. The joints and legs are not held together with nails. I thought the best way to fix it would be to turn the table upside down, determine which joints were loose and then use an expanding wood glue (as opposed to regular wood glue that I would...

Displaying/Using Wood Dining Table [ 1 Answers ]

We recently purchased a beautiful dark wood dining table with patchwork inlays. We do NOT want to cover with pads or tablecloths. Is there something equivalent to a gymnasium finish that we could put on the table that would not ruin it but allow us to use it without scratching the surface?

Removing rubber pad stains from a finished table [ 1 Answers ]

My daughter's furniture is finished with a cream color paint and laquered (?); however, all furntiure that had something sitting on it with rubber pads now has orange-ish stains where the pads were. Any advice on how to remove these stains without removing the finish? Thanks! Here is a link to...

Pizza box on wood coffee table [ 3 Answers ]

Well, as you can tell my the title, we did something stupid - we put a hot pizza box on the coffee table and we have a nice big stain. I've heard a steam iron will work; however, I don't own one. I've also heard toothpaste and ashes work; however, we don't smoke and we don't have a fireplace. ...

View more questions Search