 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Headers and gable roofs
I am adding a 20 foot extion on the gable side with no 2nd story. I am putting in 15 feet of gliding doors on the gable side with a 3.5" x 9.5" by 10' power lam header/beam. Is this an overkill and if so, what is your recommendation. PS no supports or heavy duty mullions imbetween the 4 glass glidding door sections.
Thanks, Myron |
||||
Check out some similar questions!
Headers how big is big enough
[ 3 Answers ]
I want to make a 9ft opening in my load bearing wall between the kitchen and living room and I already put a 9 foot opening in my bedroom between 2 rooms that I merged. Can I have two large openings on the same load bearing wall? And if so How big does my header have to be? I made the bedroom...
Power washing roofs
[ 1 Answers ]
How to bid power washing shake shingle roofs?
Spacing headers
[ 3 Answers ]
When spaceing headers for a 2x4 stud wall you use a 1/2 piece of plywood. What is the best way when using 2x6's for studs Thanks for your time!
Sun roofs
[ 2 Answers ]
I have just bought a second hand car. Was not told by the dealer at the time that the sunroof needed a new seal. Was just wondering if anyone had any idea how much a new seal would cost to be fitted?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
