Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wind Loads using ASCE 7-05
[ 2 Answers ]
How do you calculate wind loads using ASCE 7-05 for the following structure? A monoslope roof over an open structure. Height = 10', width = 5', length = 100' Lets say wind speed = 90 MPH, Exposure "B". The problem comes with the h / L value. In this case it is 2.0 which falls outside of...
Wind Loads
[ 4 Answers ]
Does anyone out there know how to calculate the wind load on a wooden fence? I have used 12 foot 4 x 4 pressure treated posts set in 4 feet of concrete spaced 8 feet apart. The concrete was poured in a 12 inch in diameter concrete tube. I used a strong concrete mix in the ratio 3:2:2. I want to use...
You may select the calm wind runway when the wind velocity is
[ 2 Answers ]
The calm wind runway when the wind velocity is
Warriors of the wind!
[ 3 Answers ]
Does anyone remember this movie and how badly it was butchered in comparison to nausicca in the valley of the wind? View more questions Search
|