Ask Experts Questions for FREE Help !
Ask
    poppa0777's Avatar
    poppa0777 Posts: 104, Reputation: 11
    Junior Member
     
    #1

    Nov 21, 2009, 05:51 PM
    HD TV won't get channels after unplugging
    Unplugged JVC 42" LCD TV to paint. When I turned it on, I have no sound or picture. I have run the autoscan 4 times, but it will not program any channels. This TV is 3 months old.:mad:
    When I run the autoDemo, the picture is great.
    The other TV in bedroom works fine, so not the cable co.. I have doube-checked the coax connections, and all is OK. It goes straight to the 75 Ohm connector on back of TV since I don't use a cable box.
    HELP!
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Nov 22, 2009, 07:15 AM

    Be sure Tuner is selected as Source.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Does unplugging save energy? [ 14 Answers ]

Does unplugging appliances and TVs save significant energy as opposed to just turning them off? Which appliances would unplugging save the most energy?

Unplugging a clutch interlocking switch [ 3 Answers ]

Will unplugging a clutch interlocking switch on an acura integra prevent it from starting.

Unplugging the bathtub [ 8 Answers ]

Hello, can anyone help? We were painting our house and my wife washed the pan and the brushes in the bathtub. Now the bath tub is plugged... we have tried with Drano-gel(twice) and still doesn't work. The water is going down but it takes about an hour :-( not sure what else to do as the paint might...

Unplugging O2 sensor connector [ 2 Answers ]

How do you unplug the electrical connector from an O2 sensor on a 1997 civic DX? Not sure how the clip disengages from the mating connector.


View more questions Search