Ask Experts Questions for FREE Help !
Ask
    almaden's Avatar
    almaden Posts: 12, Reputation: 1
    New Member
     
    #1

    Nov 21, 2009, 08:09 AM
    Replacement skimmer weir
    Missing weir for Swimquip skimmer. P/Ns stamped on skimmer body are 8650-15 and 8650-17. An "S" is also on the body. Is 8650-22 the correct replacement weir?

Check out some similar questions!

Inground skimmer has no suction [ 1 Answers ]

Inground skimmer has no suction. I have cleared the pipe from skimmer to pump. I do not see any water (level) leaking from pool. Pump works great on main drain. Suspect small air leak, but can not find. Any suggestions

Skimmer replacement impossible! [ 1 Answers ]

As a new above ground pool owner, I have made a huge mistake when I winterized my pool and as a result, the skimmer cracked and needed to be replaced. I purchased a new skimmer and when I tried to remove the existing skimmer, it would not budge after removing all the screws. I called the pool store...

Skimmer suction [ 6 Answers ]

We don't have any suction in skimmer why?

Skimmer gasket [ 1 Answers ]

We are replacing the skimmer gasket in our above ground pool. We have removed the four screws that hold the skimmer on, but for some reason it will not come off. We have tried going around the sides with a knife, and have removed parts of the old gasket, but it still will not come off. Are they any...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.