Ask Experts Questions for FREE Help !
Ask
    bienc's Avatar
    bienc Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Nov 14, 2009, 12:16 PM
    Honeywell smartstart II SV9520LT
    Does anyone know what the diagnostic colour codes for this Gas valve.

    PS I do know the valve failed due to water damage. Had a large fountain in the basement this summer.
    bienc's Avatar
    bienc Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Nov 14, 2009, 12:18 PM
    Quote Originally Posted by bienc View Post
    Does anyone know what the diagnostic colour codes for this Gas valve.

    PS I do know the valve failed due to water damage. Had a large fountain in the basement this summer.
    sorry model should be sv9520H
    bienc's Avatar
    bienc Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Nov 14, 2009, 12:59 PM

    Honeywell manual for this valve.

    http://customer.honeywell.com/TechLi...0s/69-1383.pdf

    Answered my own question. Hope it helps someone else.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #4

    Nov 14, 2009, 01:06 PM
    Start to finish, this has got to be the most efficient post in the history of AMHD. :D
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring for Honeywell RTH7600D, old system was Honeywell T841A1217 [ 2 Answers ]

I'd be most grateful for some assistance in wiring a new Honeywell RTH7600D to a heat pump system that has AC as well as Aux and Emergency heat (which I guess makes it a multi-stage system?). My old system was a Honeywell 841A1217, which had the following wires; I wired them to the new system as...

Replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Having trouble with wires [ 1 Answers ]

I'm replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Didn't think there would be issues, manuals are all straight forward. However when I removed the T8575, the wiring set up did not match what the RTH8500 was expecting. The T8575 has 8 wires connected as follows < 1 ...

Install Honeywell RTH230B, Removing Honeywell Q674L [ 2 Answers ]

I am removing a old (1987) Honeywell Mercury THermostat Q472L Base that has W, R, Y, G, B, O. The RTH230B has Rc (which I assume to be B), Rh (which I assume to be R), Y (to Y), W(to W), G (to G). I have no idea what to do with the O (which I read could be the Changeover. Do I just tape it up...

Installing Honeywell RTH6300B from an older 7 wire Honeywell. PROBLEMS [ 4 Answers ]

Hello everyone, I am new here. I found this site which trying to troubleshoot my problem. Any assistance would be GREATLY appreciated. Basically I have an older honeywell programmable thermostat with 7 wires attached. They are as follows... C - Black wire L - Blue wire R- Red wire W2 - brown...

Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems [ 1 Answers ]

I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)...

View more questions Search