Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Mixet shower valve installation
[ 7 Answers ]
Hello, I replaced the mixet 4 1/2" stem valve ,Its not wanting to work properly and in the instructions it says the "red dot" goes "up".. The replacement kit I got from home depot didn't have a red dot to be found or a small chennel in the brass. Any ideas on how to go about making sure the stem is...
Replacing Leaking Mixet Shower Faucet Handle
[ 17 Answers ]
I am trying to replace a leaking Mixet shower faucet. I've somewhat successfully removed the knob by breaking it off. Now I cannot remove the mixing handle/lever. The new one I purchased has a set screw. The original one does not yet it will not budge off the stem so I can get at the hex nut to...
Mixet shower handle/cartridge
[ 3 Answers ]
I recently had a leak in my shower and replaced the Mixet cartridge which seemingly fixed the problem, but now the dial/handle seems unresponsive and isn't opening or shutting the valve. I can open it and close it by turning the handle screw with a screw driver, but that doesn't seem like a good...
Mixet faucet parts
[ 1 Answers ]
Where can I buy Mixet faucets parts? I'm from Newfoundland, Canada
Shower faucet in need of change
[ 3 Answers ]
Hi, I'm new to this question asking, so be gentle. I have an older home, built in the 50's. The plumbing in the bathroom is beginning to give me grieve. The faucet and diverter in the shower have started to leak. I purchased a new set to replace these BUT? The old ones have 13" to the centre and... View more questions Search
|