Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
MTD rear wheel removal
[ 11 Answers ]
I have a 18 horse MTD Lawn tractor about 15 years old. I need to remove the rear wheel to change the tire. I have removed the cotter pin from the axel and the washer, but I can't get it to come off. It appears that they're may be a key pin of some sort on the axel. I don't have the model number I...
Riding mower rear wheel removal
[ 2 Answers ]
I have a troy built riding mower that I need to replace the tire. The model is a Y609H and is about 5 years old and I have not removed the wheels ever. I have removed the plastic cap and the bolt but it seems as though the rim is stuck on the axle. Any help would be appreciated.
Bad vibration through rear wheel?
[ 6 Answers ]
Hi there I have a 2001 xjr1300 and over the last few weeks I've started getting bad vibration through the back end fitted new chain and sprockets all in line new wheel bearings shocks OK it mainly happens about 60mph swingarm bushes OK to could the anti vibration plate or spring on the clutch...
Rear wheel won't come off/pin is stuck
[ 1 Answers ]
I have a Murray riding mower and am trying to take the rear wheel off to put it on another one that i am switching everything to and the pin has been pushed down too far. Have tried grease, wd40 and crow bar and hammer. But nothing will loosen it. Does anyone have any suggestions on what i can try?
How to Remove Rear Wheel
[ 1 Answers ]
How to remove rear wheel from Murray riding mower that has a square key in the key slot. View more questions Search
|