Check out some similar questions!
Coleman evcon furnace
[ 4 Answers ]
Furnace will won't heat. Model #BGMO7516B Serial # 980905038. Red light blinks once. Will ignite but won't kick in to heat.
Coleman evcon furnace
[ 5 Answers ]
My home has coleman evcon furnace 12 years old.I can set the thermostat at 74 degrees and the furnace will start with a 30second purge then the ignitor will warm up and glow red then the main burner lights.then the burner stays lit and the blower runs for a couple minutes. Then the thermostat calls...
Coleman Evcon Furnace
[ 1 Answers ]
We have a Coleman Evcon DLAS075BDD furnace which keeps displaying error codes: 1-Ignition Failure and 4-Limit cycling. We have replaced the circuit board. Inspected the ignitor and the flame sensor and both appear good. Also have taken the exhaust vent/hood off and vaccuumed out any rust to...
Coleman evcon oil furnace
[ 8 Answers ]
I have an older coleman evcon oil furnace that ran fine until today.It still runs but the smoke exiting the chimney is pure black and sooty. Would this be an indication it's not getting enough air or maybe getting too much oil? Don't have any experience with oil furnaces. Thanks, Ken
Evcon propane furnace
[ 1 Answers ]
I have an Evcon mod. CGU09516 furnace. Upon starting it seems to work OK. But when blower motor cuts in the flame cuts out.After doing this 2 or 3 times it cuts out and will not cut in anymore. ... View more questions Search
Add your answer here.
|