|
|
|
|
New Member
|
|
Nov 2, 2009, 05:33 PM
|
|
Need to identify this part
Hello,
I have this shower, the porcelaine handle is broken and I cannot identify the make to find the part. Here is the picture, the handle in the red circle is broken
Thank you for your help.
Gege
|
|
|
Senior Plumbing Expert
|
|
Nov 2, 2009, 05:41 PM
|
|
Hi Gege...
Unless someone else pops in with info. I would advise you to take this picture to a local plumbing supply company and see if they can identify the make/model and get a part ordered for you.
Otherwise, if it is only the porcelain part of the handle that is broken you may be able to take a small plastic pipe, for example, and cut it to the correct length and install it to the handle.. should give a reasonable presentation and at the least take the eye sore away... ;)
You could also make your own out of clay and have a local potter fire it up with a porcelain glaze and then install that... just another idea... ;)
Check back later tomorrow and see what others think.
Good luck...
MARK
.
|
|
|
New Member
|
|
Nov 2, 2009, 05:53 PM
|
|
Originally Posted by massplumber2008
Hi Gege...
Unless someone else pops in with info. I would advise you to take this picture to a local plumbing supply company and see if they can identify the make/model and get a part ordered for you.
Otherwise, if it is only the porcelain part of the handle that is broken you may be able to take a small plastic pipe, for example, and cut it to the correct length and install it to the handle..should give a reasonable presentation and at the least take the eye sore away...;)
You could also make your own out of clay and have a local potter fire it up with a porcelain glaze and then install that....just another idea...;)
Check back later tomorrow and see what others think.
Good luck...
MARK
.
Thank you Mark,
I did bring the handle and picture to a few plumbing supply, but nobody can find the brand.
Gege
|
|
|
Plumbing Expert
|
|
Nov 2, 2009, 06:09 PM
|
|
It looks like older model Restoration Hardware product. Go to Restoration Hardware - Furniture - Bed & Bath, get their contact info and request the replacement handle.
There should be brand name someplace on the valve or handle. Take a closer look...
Good luck... and come back to let us know how you did. Milo
|
|
|
Home Improvement & Construction Expert
|
|
Nov 3, 2009, 04:27 AM
|
|
My suggestion would be to make new ones out of white Corian.
|
|
|
Eternal Plumber
|
|
Nov 3, 2009, 07:51 AM
|
|
I wonder how it got broke in the first place.
|
|
|
New Member
|
|
Nov 3, 2009, 12:55 PM
|
|
Thank you all for the help.
I hope to find it now with these informations.
About how it broke, well I guess the handle was loose, then it fall on the tiles and the porcelaine part broke.
Gege
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
80s animated movies part cartoon part real
[ 12 Answers ]
It started a movie then turned into a cartoon there were a girl and a boy lost in the woods mee little jon an indian boy pulls bark off a tree and teaches them to eat bugs grub looking things,and at the end it turns back into a movie and all the friends the boy and girl made on there adventeure are...
70's movie part live action / part cartoon
[ 3 Answers ]
It was about a boy who found a dragon (the dragon was the cartoon part) and a family tried to take it away from him. They were trying to make a profit off him or something. Its characters look run-down kind of like chimney sweepers back in the day.
Power goes out in part of house w/out tripping breaker Part 2
[ 2 Answers ]
How would I use a voltage tester? Would I go from outlet to outlet measuring the voltage? I've gone around the house and tightened outlets and opened the panel and tightened the screws that were not tight.
I haven't seen the lights dim since I tightened everything.
Thanks a lot!
Gbrown
View more questions
Search
|