[-IRVy-]

My Kenmore 80 series model #110.23822100 agitates but does not spin. Any suggestions?? She is less than 5 years old. Also, how do I find a repair manual/guide that will show me how to get into the sucker?? I have a "Repair Parts List" from purchase, but nothing on how to actually repair. Thanks.

[esquire1]

If the water is not pumping out it will not go into a spin cycle. If the water is pumping out check the lid switch for continuity.Also check the water level switch and the timer contacts.

[-IRVy-]

Thanks. The machine drains and cycles through while makes a spinning sound but does not spin. I will try and check the contacts but first have to figure out how to open her up.

Thanks again.

[PatJenCol]

Thanks. The machine drains and cycles through while makes a spinning sound but does not spin. I will try and check the contacts but first have to figure out how to open her up.

Thanks again.

I'm having the same problem, onlymy machine is a little older. You can hear the motor running, the water drains/fills, and all the other cylces run normally. The brake simply is not disengaging UNLESS I simply open and close the lid. Sometimes I need to activate the microswitch a few times before the brake releases. And it's not the switch. I can hear a click coming from the internal of the machine.