Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Propane Furnace won't start no pilot light red light flashes 3 times
[ 6 Answers ]
My propane furnace G6RC has no visible flame and the red light either stays on or flashes 3 times in a row and then the furnace shuts off and tries to restart
Does putting gas hot water heater dial on PILOT put pilot light out?
[ 5 Answers ]
My gas hot water heater dial has OFF to the left, PILOT in the middle and ON to the right. If we are going away and want to not have the water heated can we just turn the dial to PILOT and the flame will stay lit but just won't heat the water or does the flame go out completely and then PILOT would...
Intermittent pilot light burns well but main burners do not light
[ 1 Answers ]
I have an Olson furnace with intermittent pilot light with electronic spark ignition. There is a Honeywell S8610U furnace controller. When thermostat calls for heat the ignitor sparks and the pilot flame lights. The flame continues to burn while the ignitor continues to spark for about 5+...
Pilot light stays on but pilot switch keeps resetting
[ 5 Answers ]
I have a baso L62AA-5 pilot switch and it used to keep resetting. I would hold the switch down for a good minute and the gas lights, but after a half an hour or so it would go back to its reset position. The standing pilot light was always on and never a problem. After a few days of manually... View more questions Search
|