Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Repairing and painting Block Foundations
[ 2 Answers ]
Power washing my block foundation to remove old peeling, flaking paint has left pock marks and some loss of mortar in joints. How do I repair and then what type of primer paint should I use? (Don't know what the original paint was-oil based or latex). I'd appreciate your help. Thanks.
Repairing cinderblock foundation
[ 2 Answers ]
Hi all. I posted this in Exterior Home Improvement but it has not received any replies. I thought it might be better suited here. My house is on a hill so the front is at level with the street and the back foundation is partly exposed. The garge is part of the basement and level with the...
Repairing a basement stall shower
[ 2 Answers ]
There is an existing stall shower in the basement, however it isn't hooked up anymore. I want to fix it up and get it going, but I have never done anything like this before... any suggestions?
Repairing cinder block foundation
[ 0 Answers ]
Hi All, My house is on a hill so the front is at level with the street and the back foundation is partly exposed. The garge is part of the basement and level with the driveway. Over the years water coming down from the roof and building up behind a 2 1/2' retaining wall next to the garage has...
Repairing tub trip drain
[ 1 Answers ]
I need to replace the rod and bucket for my brass trip drain on the tub. The problem is that the normal replacement "bucket" is too large. My old one measures about 1.25 inches. Generic replacement is about 1 5/16 inches. Where is this available? I hate to replace the entire drain system if not... View more questions Search
|