Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wire conversion for 2-stage heat/1-stage cool thermostat
[ 1 Answers ]
What is the conversion for wire connections from a Lennox to a White-Rodgers 1F72-151. The old connections were: G, W1, W2, Rc, Rh, Y1 and Y2. The new connections are: W2, E, O/B ,R ,L ,G, C and Y
Single Stage or Dual Stage Heat Pump?
[ 4 Answers ]
We are replacing our old AC and electric furnace with a heat pump and an electric furnace with variable speed blower. The decision we are struggling with is single stage vs multiple stage heat pump. Our house has two levels, and the upper level is always HOT in summer without AC. The ducting to...
Hvac1000: Or ing stage relays (multi-stage stats to single stage)
[ 1 Answers ]
Would you agree that you can and should OR the outputs of say a 2 stage heating stat to make it a single stage? OR means connect the outputs together. Example: Connect W and W2 to create a single stage stat. I'm under the impression that either W1 or W2 is activated and not both and that this...
White rogers thermostat 2 stage heat 1 stage cool
[ 6 Answers ]
Anyonw know how to hook this up with a dpdt relay There is 5 wires , outdoor heat for stage 1 heat , propane gas for stage 2 hear Thanks For any help :confused:
White rogers thermostat 2 stage heat 1 stage cool
[ 1 Answers ]
What is the right wiring to hook the WHITE ROGERS 80 SERIES thermostat up ( 1F82-261)? I have a outdoor wood burner dlowing hear to a exchanger in the ducts , and I have propand gas as a back up sorce The furnace is a coleman evecon ( 94 model) with ac (up draft) I think I had the wiring... View more questions Search
|