Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Noma themostat 52-2570-6
[ 5 Answers ]
WE purchased a Noma programmable thermostat yesterday and are severally frustrated. Hook up was easy but when we connect it the room temperature will not display it reads "HI". Can anyone tell us what we are doing wrong?? It is a two wire system with only a red and white wire. The red is...
Noma Programmable thermostat
[ 14 Answers ]
I have tried to replace a conventional lever action mercury thermostat with a new digital programmable Noma thermostat. The AC works fine but when I turn on the heat, the AC come on then too and not the heat. I have no heat. This was the wiring for the original thermostat: Orange -> Y Red ->...
Noma programmable thermostat
[ 2 Answers ]
We have programmed the thermostat and it always jumps back to another setting. Can you help.
Noma programmable T/stat
[ 2 Answers ]
Replaced a lever type t/stat (heating & A/C) which had 5 wires connected. Orange wire > yellow terminal on T/stat White wire > terminal Green wire >terminal Red wire >terminal Black > terminal. The new Noma has 4 terminals only Yellow, White, Green & Red. Connected and matched Colours using...
Programmable noma thermostat
[ 1 Answers ]
I am changing a York thermostat to a Noma programmable. I have rewired transferring w to w, rc to rc, g to g, y to y . There is a wire jumper on the York that goes from rc to 4. There is no corresponding 4 on the Noma. Does anyone have a suggestion as to where the wire jumper should go if I... View more questions Search
|