Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Intertherm
[ 1 Answers ]
Where are the reset button located on the inertherm. I know there are 4 please help.
Intertherm headache
[ 1 Answers ]
My unit is an intertherm model E2EB-015HA the heat comes on but not the fan. Have replaced fan motcr ,replaced 1 breaker ,sequencer,and high limit thermostat. HELP!! Does anyone have a wiring diagram or know where online it can be acquired FREE?
Old Intertherm t-stat out,what to put in?
[ 4 Answers ]
I have a mobile home with an Intertherm furnace, used for both heating ond cooling. I have one T-stat that controls which function is to be used,(heating/cooling). This one controls the cooling temp,and fan. I have a second T-stat that controls the heat temp. It is an old two wire mechanical and I...
Intertherm furnace
[ 2 Answers ]
I have just in the last month had an Intertherm furnace installed, and since installation they have had to come in twice because they claim the starter button is not firing. They replaced it and now it is on the fritz again. It starts for about 8 seconds and cuts out. There is fuel in the tank....
Intertherm Furnace
[ 1 Answers ]
My pilot light comes on and ignites heat exchanger but when the cover closes the flames shut down. The blower works but heat exchanger will not stay lit. I have replaced the gas valve and the thermo couple. Suggested that damper valve needed to be adjusted - where is the damper valve View more questions Search
|