 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to clean plastic or fibreglass shower pan?
Builder installed a plastic or fibreglass shower pan. It is very difficult to keep clean. I have tried many products and polishes. The polish helps but still the Shower floor, which has ridges, never looks completely clean.
|
||||
Check out some similar questions!
I have an RV shower was leaking in compartment below shower. I took it apart now would like to reinstall. What is the proper sealant to use for plastic drain on plastic shower floor? Thank you
Hi all, we built a couple of units two years ago and the plastic shower base in one of the ensuites has cracked. I am wondering what may have caused this and if there are any fixes besides replacing the whole shower base. Is it possible to have dodgey bases? This is the second one to go. Thanks...
Should have known there was more to it :confused: I'm trying to replace a plastic shower pan I believe was placed/inserted over tile from the pervious homeowner (Not sure) I have removed the shower door and removed the caulk surrounding the pan, I have also removed the drain cap but not the...
Hello, I have installed a new shower pan in the basement and the pan came with a plastic drain kit. The drain is leaking around the seal underneath very slightly. Is there some type of caulk or epoxy that I could apply to the bottom to stop the tiny leak? Though I followed the manufactures...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
