Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling fan will not work after replacing 3 speed pull chain switch
[ 129 Answers ]
I just recently replaced a 4-wire (3-speed) Ceiling fan switch on my ceiling fan. The chain had broken off inside the switch. After installing the new switch, the fan wouldn't turn At all. I have tried the swithes at all speeds And even went out and purchased another switch thinking the first...
New pull chain switch for ceiling fan light
[ 14 Answers ]
Hello, I just purchased a new pull chain switch for my ceiling fan light. The lead wires coming down are white and blue. The wires on the new switch are black, blue and red. Normally these are simple installs but I need help on how to wire these due to the different colors. Thanks!
Ceiling fan switch replacement-chain broke
[ 3 Answers ]
The chain to operate my 3 speed fan broke off. I have no way of turning off the fan so I flipped the switch in my electrical box to the room. I have marked the position of the 4 wires and am trying to remove them from the switch, however, they appear to be sodered. I read in one article that I...
Ceiling fan light pull chain replacement
[ 5 Answers ]
Pull chain on the ceiling fan light broke off, so I pulled it down, and figured out what to buy, but at some point one of the two black wires going to it came loose, presumably out of a screw cap. Does it just go in the cap with the other black load wires (3 still together)? Do I understand...
Installing fan and light switch for ceiling fan
[ 9 Answers ]
I am trying to install a switch that controls both the ceiling fan with 3 speeds and a dimmer switch all in one unit for a hunter ceiling fan. At the wall switch there is a black wire which is always hot, a red and a ground. At the ceiling, where I removed a light fixture, there is a black, red,... View more questions Search
|