Ask Experts Questions for FREE Help !
Ask
    bigjim's Avatar
    bigjim Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Oct 28, 2006, 07:03 AM
    Humidifier w/ 2 furnaces
    I have a house that is appx 3000 sq ft. The bubilder put in 2 furnaces 1 for the upper level and one for the lower. I would like to get a humidifer but don't know if I need 2 (1 for ea furnace ) or if I just put one on one of the furnaces
    Thanks
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Oct 28, 2006, 07:20 AM
    Why not start with one? Perhaps upstairs where you sleep. I am sure some of the added moisture will work its way down stairs. If it is still too dry downstairs, you can always add a second one later.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Humidifier Power [ 1 Answers ]

I have recently installed a whole home humidifier that runs on 24 VAC. I currently am running it off a power brick plugged into a standard 120VAC outlet. I would like to set up the humidifier such that it only runs when the blower is running. I have put a meter across the C and G terminals where...

Filters on Furnaces [ 1 Answers ]

Hi, I'm having trouble opening the furnace door to install new filters. It is a Carrier furnace. Help! Thanks.

Aprilaire Humidifier [ 1 Answers ]

I just installed an Aprilaire 550 humidifier on my Goodman furnace but can't figure out how to wire it. The furnace has a control board which has a 24 volt HUM terminal. My humistat has two terminals. I am looking for a very simple explanation on how to wire this thing up.

Humidifier installation [ 2 Answers ]

Got a new Cleanaire humidifier with 24 volts input and have problem to find 24 volts feed from furnace. Is there any way to get 24 volt from furnace without using 120 to 24 volts transformer. Thanks in advance. :confused:

View more questions Search