Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Celing fan pull switch
[ 8 Answers ]
I have a stacked switch that will hold 8 wires there were 2 black 1 grey 1green and 1 purple. Some one replaced it and got it wired wrong the fan stayed on low and the switch would not effect it. I took and old single layer switch from another fan touched the black to each wire to find the speeds...
Painting an unfinished basement celing
[ 3 Answers ]
Any advice on painting an unfinished basement ceiling. I did read the posts about spraying But what type of paint wshould be used to cover the wiring, ducts etc as well as the joists etc. Has anyone tried this apporach. It is popular in commercial spaces and I have seen it in a few basement...
Hampton bay celing fan
[ 1 Answers ]
I just installed a hampton bay redington IV ceiling fan w lights. I can get the lights to work with the remote, but I can't get the fan to work manually or with the remote.
Hampton Celing Fan
[ 3 Answers ]
Hi I have a question, I just got a new hampton celieng fan. I tried to look for a service number and HA! None to be found, so I figured I could trust the guys here. I installed the fan and separate light kit, the lights work, and I can hear the fan motor working but the fan blades do not work...
Mounting a new celing fan
[ 1 Answers ]
Hi I just moved into a new home and trying to mount a celing fan in the bedroom.The builder have already installed a wired mounting, so I had no problem mounting the fn, but wiring is another story! There are 3 outlets coming out of the wiring housing: First have 1 purple, 1 yellow and 1 white... View more questions Search
|