Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Does putting gas hot water heater dial on PILOT put pilot light out?
[ 5 Answers ]
My gas hot water heater dial has OFF to the left, PILOT in the middle and ON to the right. If we are going away and want to not have the water heated can we just turn the dial to PILOT and the flame will stay lit but just won't heat the water or does the flame go out completely and then PILOT would...
Blower on Intertherm Furnace
[ 6 Answers ]
This is an older furnace.It works fine sometimes! I raised the tstat and nothing happened, I pushed the fan switch from auto to on and it worked-back to auto and it didn't work. When I checked the breakers and flipped them off and back on the blower started.Any idea where the problem may be? ...
Furnace Pilot stays lit continuously
[ 1 Answers ]
My furnace pilot stays lit continuously Even though it states inside of the furnace and I quote "Pilot will light automatically when there is a call for heat. NOTE during thermostat off cycle main burners and PILOT flame are both extinguisehd. I have gotten many rude response that say that's...
My Furnace won't kick on even after I've manually primed it 10 times
[ 1 Answers ]
I need to know why I can't seem to keep the furnace running I prime it it stays on for 2 minutes then shuts down even before the blower starts . What's up with the red light near the reset button
Furnace Won't Go On
[ 2 Answers ]
The pilot light is on but the furnace won't go on. I turned the thermostat way up and it still won't go on. The circuit breaker is on. Thanks... we're freezing here in buffalo today View more questions Search
|