Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Best way to cap a copper water line: compression fitting or copper cap?
[ 29 Answers ]
Hi all, Unsuccessfully tried to cap a copper water line by soldering a pre-soldered cap onto the end. Took all the proper steps, cleaned the ends of the pipe and fitting first, then applied flux around both. Wasn't quite sure what I should be heating, so I just heated everything. After my first...
Connecting two in line copper water pipes with compression fitting
[ 2 Answers ]
Before connecting the two sections of pipe together, is there something that the surface of the pipe should be coated with that ends up inside the fitting before connecting the two?
Braze or solder 3" copper water line ?
[ 5 Answers ]
At work we had to fix a buried 3" copper water line, what is the best way to do it brazing or solder?
Loud Bangs Coming from PVC waste pipe and Hot Water Copper Line
[ 6 Answers ]
A year ago I had a crack and leak in our PVC waste pipe just behind our family room wall close to the first story floor. The plumber opened up the drywall and cut out the cracked portion (2 feet) which exended from just behind the family room wall down to the basement and replaced it with a new... View more questions Search
|