Ask Experts Questions for FREE Help !
Ask
    savery's Avatar
    savery Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 18, 2006, 11:36 AM
    Stripped stem
    Cold water handle spins because stem is stripped; how do I repair this
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Oct 18, 2006, 12:29 PM
    If the stem's stripped then take it in to a plumbing shop and have it replaced. Make sure you know the brand name of the faucet when you go in.
    However, if the threads in the valve body's stripped then you'll have to replace the faucet. Regards, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Stem Placement [ 7 Answers ]

We are replacing the stems on the hot/cold faucets of our 3 handle tub/shower. We have tried placing the stems facing many different directions, but still we can not get the faucets to turn on and off properly. What are we doing wrong? No directions came with the Danco 3S-9H/C stems. Any help...

Stem problems in bathtub [ 3 Answers ]

I was wondering if a novice could get some advice. I have an old home and with it an old plumbing system. I have faucet knobs for my shower and 2 for my tub water. The hotwater knob for my Shower started to spray water from the stem. I took it apart and exposed the Cartridge and after that it...

Stem Cell Research [ 4 Answers ]

Hey all, I am currently taking a philosophy course and we have been assigned a debate assignment that is in regards to the morality of stem cell research. My group was given the task of being opposed to stem cell research. If anyone can give me any idea why people may be opposed to stem cell...

Diverter Stem [ 1 Answers ]

I am replacing seats and stems in tub/shower. The old one is Sterling--the new faucet set it a PricePfister. The PF diverter stem doesn't fit into the seat (the hot and cold stems do). Can I go to another size diverter with PF?

Stem replacement [ 3 Answers ]

I replaced the stems in the handles of my bathtub faucet. The cold is fine but the hot water leaks where it is screwed into the pipe. Why? I used plumbers dope on the threads and all the washers and O rings are in place (was done same as the cold) why is it still leaking? Very frustrating. It...

View more questions Search