Which barrell?
Have you tried out Smart Part's new Freak Kit? You are basically matching the barrel to the paint.
Different balls have different sizes, PMI vs RP Scherer vs Big Ball. And then different barrells have different sizes. You really want to find a barrell that will hold a ball in place and barely be able to blow it out with a hard breath. If the ball rolls out or is stuck, then it is not a good match. When the ball and barrell are matched perfectly, they you will get the most accuracy since the air being expelled is being pushed out evenly. Certain barrells such as the Smart Part's AA,are designed to spin the air behind the ball. This of course is best achieved when the ball matches the barrell.
Good Luck
David
|