Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Briggs & Stratton 16.5 OHV
[ 19 Answers ]
I have a B&S 16.5 OHV MTD Yardman that will not turn over even though the starter and battery are OK. It will turn to a point and then stops. If I remove the spark plug it turns freely like it should. I know that removes the pressure in the cylinder but I don't know what could cause it to bind...
Briggs & stratton 12.5
[ 8 Answers ]
My husband has an MTD with a b and s 12.5. It has run weill with some babying for a while, now. One day he was running ti and he heard a loud POP , and that was the end. It has new solenoid, starter, bettery and a few other things . The key is it is GETTING gas into the bowl, but not going ...
18.5 briggs & stratton smoking
[ 2 Answers ]
I need to know how much oil as in ounces it takes to fill it so I don't over fill as it says nothing in the owners manual? Thanks
Briggs &stratton 15 hp.
[ 1 Answers ]
The other day this engine just quit and I had no spark from the coil. It has the electronic ignition so I cleaned everything under the flywheel and put it back thinking that this must be the problem but no. There is a small wire that goes to the coil and when I pull it off it will fire. I found two...
Briggs & stratton 16hp
[ 1 Answers ]
Hi, I have a Cub Cadet which had a 16hp BS motor with points. It went bad so I found another 16hp BS that does not have points, it has the magnetron ignition. I am having trouble getting it to fire, is there something that I need to change to the wiring to make it fire. The magnetron engine came... View more questions Search
|