Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cast iron soil stack to pvc
[ 15 Answers ]
the plumbing in our house is from 1936. We noticed a large stain in the ceiling, tore it out to reveal the cast iron soil stack (runs from the upstairs bathroom turns a corner then runs straight to the basement) and found the leak was around (very bad leak) the lead joint. My husband finally got...
PVC into an Cast Iron opening
[ 1 Answers ]
I have old cast iron drain pipes. The bathroom sink has a 2in galvanized pipe that screws into this cast iron pipe. The galvanized pipe is rusting out. Can I replace this galvanized pipe with plastic pipe?
Connecting pvc to cast iron
[ 1 Answers ]
How can I connect a pvc pipe to a cast iron bell? What type of adhesive should be used?
PVC to Cast Iron Drain Mating
[ 1 Answers ]
What is the best way to mate a new 2" PVC drain into an existing 3" cast iron bell that is part of the 4"` cast iron vent stack. The previous arrangement was 2" galvanised into the bell, sealed with oakum and lead. I looked at the Fernco thick rubber gaskets but the cast iron bell seems a bit out...
Cast iron or PVC waste/drain pipes?
[ 5 Answers ]
Hi everyone. I'm in the middle of a major remodel to my 1947 home, including adding a second story. We're trying to do everything top-notch, which leads me to the experts here. Here's my question: For the waste/drain pipes, I know we want to use cast iron in the drops between the floors (for... View more questions Search
|