Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Old bathtub drain issue
[ 3 Answers ]
My bathtub drain has gone from being sluggish to taking hours to drain completely. (Luckily, I live alone!) I've used Drano. I've snaked it, and the snake is catching on what I assume used to be a part of an old drain stopper mechanism inside. Currently, there's no drain stopper in the tub. The...
Toilet and Shower Drain Issue
[ 2 Answers ]
Hi, I moved into a brand new house 6 weeks ago. Over the last two weeks I have been having intermittent problems with the shower drain and the toilet next to it. The toilet will sometimes fill up with water whilst flushing and take quite a whil to go down to normal level. Also sometimes...
Shower Drain Issue
[ 1 Answers ]
I need a real creative mind for this one. I bought a condo with an old custom build corner shower. I found a neoangle shower that we liked and demo'd the old. There were two concrete beds, one poured level with the subfloor and then one that was shaped with the proper drop, etc. I decided to...
Raising a floor drain in concrete floor
[ 2 Answers ]
I have an old concrete floor with a newer pvc type drain. The floor slopes about 1.5" over 2' around the drain so I would like to raise the drain in order to level the floor to install ceramic tiles. I'm still going to ensure the floor slopes toward the drain just enough. I figure I need to...
Converting cast iron floor drain to shower drain
[ 3 Answers ]
I am adding a bathroom to my basement, which has partial (complete? ) plumbing already roughed into the floor (in 1976). Sewage lift station (vented) is 3 ft from 4" styrofoam plug (toilet), 4 ft from 1 1/2 inch cast male pipe end extending through floor (lav, have already added vertical vent... View more questions Search
|