Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How I fixed my RTH230B 'blue wire'
[ 5 Answers ]
Hi All, This seems like the hottest place for Honeywell RTH230B questions, so I thought I would post what worked for me after much reading on this forum and troubleshooting. My old thermostat had five wires: read, white, yellow, green, blue The Honeywell connections for: Rh, Rc, W, Y, G ...
Neutral wire is hot(has voltage potential like the black wire)
[ 5 Answers ]
Hi, The problem started at midnight last week. One of my line in the basement is starting to have issue whenever I connect a water pump or appliances to the outlets. Before I plug the appliance in, the neutral is neutral(zero voltage), but when I plug the appliance in, the neutral is now...
Blue, Black and White wires in celing fan
[ 2 Answers ]
I removed a ceiling fan to replace a switch but did not note the wires. Now I want to replace the fan but find it has Blue, Black and White wires, whereas the wires coming from the ceiling are only White and Black. It also has a green wire attached to the casing. Does the blue and black wire...
2 Wire White-Rogers with no wallplate wire question
[ 2 Answers ]
Hi there. I want to replace my current White-Rogers 1E56W309 thermostat with a new Honeywell RTH7500D. The problem is that the tools that installed my high efficiency furnace didn't install the wall plate with my thermostat (it was a new house and the builder contracted these guys). Instead,...
Installing Honeywell RTH230B, what to do with blue (B) Wire
[ 0 Answers ]
I am trying to install of Honeywell RTH230B thermostat. I removed the old Lux mercury thermostat and their were five wires Rh, W, Y, G, and B (blue). The thermostat has place for all of the wires except the B(blue) wire. Do I need a different thermostat or can the B wire be put in the Rc space... View more questions Search
|