Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing toilet flange
[ 6 Answers ]
I'm getting ready to install a toilet flange in my unfinished bathroom (in the basement so the flooring is a concrete slab and will eventually be ceramic tile). There is currently a 4" stub out sticking up out of the slab for the toilet drain. I thought I could simply cut the pipe down closer to...
Toilet flange above floor level
[ 56 Answers ]
I've seen plenty about the opposite problem - maybe this is something less common: my toilet flange is above the anticipated floor level. I recently removed old tile from the bathroom floor, planning to install new tile. In so doing, I discovered that the old tile was set on about 3 inches of...
Installing new toilet flange to 3" galvanized
[ 3 Answers ]
I'm installing a new toilet in a basement and the plumbing was roughed in back in the early 40's. The problem I having is trying to find the right flange that will work with 3" galvanized pipe. From what I can see I don't believe it's cast iron, but it wouldn't suprise me if it is. I bought a 3"...
Replacing toilet floor flange
[ 3 Answers ]
I was replacing my toilet and found that my flange was rusted so much that I couldn't get the flange bolt on one side to lock into the flange so I must replace the flange. It's made of metal with ABS and obviously is glued into the ABS sewer pipe riser. I'm assuming that I need to get underneath...
Toilet flange below the floor level- URGENT
[ 3 Answers ]
Hi Guys, I just quickly reviewed all postings here trying to see if I can find an anwer to my question, but some things are too difficult for me to understand, as I am not familiar with the whole subject. I hired a plumber to install a new toilet in half a bath in the basement. The old toilet... View more questions Search
|