Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Connecting new 220V line & tapping off a 110V outlet.
[ 4 Answers ]
I have a 220V outlet on the outside of my garage, originally intended to power 220v compressors, welders, etc. I am installing a well not far from this outlet, which needs 220V and I want to run a line from the outlet (underground) line to the pump. How do I do the connections to the pump and can I...
Splicing into 240v line
[ 8 Answers ]
I would like to wire an electric baseboard heater and 4 can lights on the same 15 amp circuit. The total load would be about 140 watts under the 80% allowed for the circuit. The heater, which will require 1000 watts, requires 240v hookup. So my question is this, can I safely spice into the 240...
240v heat & 120 outlet on same line?
[ 4 Answers ]
Hi - I have a 240v convection heater with no 120v features (fan, timer etc). I have a dedicated run of 12/3 wg available. Is there any way to use that spare 3rd wire to provide a couple 120 v outlets? Thanks, Taylorsk
Tapping into Septic Line
[ 2 Answers ]
I have just added a new shower to an existing bathroom with just a toilet. I would like to tap the shower drainage line into the toilet line that is running out of the house into our septic tank. I have never tapped into an active line. Advice on what tools, and techniques should be used to tap...
Tapping a gas line
[ 4 Answers ]
Is it possible to tap into a gas line to tee off for another appliance? Two story house with the main living area upstairs. Garage is under the front half of the house, which is the living room and kitchen. Here's why I ask. My main gas line (3/4" black iron) travels across my garage ceiling... View more questions Search
|