Ask Experts Questions for FREE Help !
Ask
    diannessweetie's Avatar
    diannessweetie Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 12, 2006, 05:21 PM
    Help with installing a ceiling fan with remote
    I have a Hampton bay northport lll 52 " ceiling fan.
    It has a remote control with it, I have no clue where the wires go to install the receiver.
    It has a white, black, and blue wire on the output side
    A white, and red wire ont the input side?
    Can anyone help me with this...
    Thank you much... :)
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Oct 13, 2006, 11:18 AM
    The black, white, and blue go to the same colored wires from the fan.

    The red and white go to the black (or red) and white from the house.

    http://www.ceiling-fans-n-more.com/c...fan-wiring.php
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling fan remote control [ 34 Answers ]

?? Hi I have a hampton bay sidewinder ceiling fan that came with a wall mount remote control. I wanted to have a hand held remote control, so went and purchased a remote control that came with its own receiver (hunter). I replaced the original receiver with the new receiver. The hand held...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Installing fan and light switch for ceiling fan [ 9 Answers ]

I am trying to install a switch that controls both the ceiling fan with 3 speeds and a dimmer switch all in one unit for a hunter ceiling fan. At the wall switch there is a black wire which is always hot, a red and a ground. At the ceiling, where I removed a light fixture, there is a black, red,...

Installing Ceiling Fan Wall Remote with Red & Black Wires? [ 13 Answers ]

I am trying to install a Hampton Bay Wall Remote Control that transmits a signal to a receiver that I will install behind the Ceiling Fan assembly. Problem: Remote instructions state to connect the 2 Black wires from the wall switch to the new Remote switch. The wall switch has a Red and a...

Need help installing ceiling fan [ 3 Answers ]

Have a hampton bay fan w/ One white wire-neutral One blue- lamp One black- fan In junction box have 2 capped blacks 2 single whites

View more questions Search