 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
F3 indicates that the door (or lid) switch has a problem. Possibly corrosion. Replacing the door switch will fix the problem. However, there's always a small possibility that the control board is faulty and is sending a false signal. F4 indicates the "recirculation pressure switch" has failed. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My washer will fill and agitate but when it should drain it just recycles the water back into the tub. Originally we had an error code "LD" and took the whole thing apart to find a sock in the pump. Now that I have put it back together, it won't drain just recycles.
The washer won't work, just display these error codes but I don't know whar what that means
How do you remove the top of a Whirlpool Gold Catalyst Washer? There is a hose that connect at the top that is leaking.
We have a catalyst washer model number GSX9885JQ0. My wife said it stopped agitating. I did the diagnostic steps given in the control panel and it agitates fine. The only thing that it didn't do was drain out of the machine on the drain test. It recirculated OK. During a wash cycle it actually...
This was our FIRST Whirlpool washer/dryer set and our LAST!! How does one remove the control panel?
View more questions Search
|
