Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Briggs & stratton 12.5
[ 8 Answers ]
My husband has an MTD with a b and s 12.5. It has run weill with some babying for a while, now. One day he was running ti and he heard a loud POP , and that was the end. It has new solenoid, starter, bettery and a few other things . The key is it is GETTING gas into the bowl, but not going ...
Briggs & Stratton 14.5hp OHV - Won't Run
[ 8 Answers ]
I have a yard machine mower that was running great. It shut off in the middle of cutting and that was that. If I pour gas in the carb it tries to start, so I know I have fire. I have plenty of gas going to the carb and the solenoid on the bottom is working fine. I had the carb off, took the main...
Briggs 16HP L-Head 401707 0131-01 78011812
[ 2 Answers ]
Help! :confused: I have a Briggs 16HP L-Head 12V electric start motor (401707 0131-01 78011812) that was given to me. I want to put it on my current riding mower but all the wires have been cut and the bitter ends are just hanging from different places on the motor. I've been able to...
Briggs &stratton 15 hp.
[ 1 Answers ]
The other day this engine just quit and I had no spark from the coil. It has the electronic ignition so I cleaned everything under the flywheel and put it back thinking that this must be the problem but no. There is a small wire that goes to the coil and when I pull it off it will fire. I found two...
Briggs & stratton 16hp
[ 1 Answers ]
Hi, I have a Cub Cadet which had a 16hp BS motor with points. It went bad so I found another 16hp BS that does not have points, it has the magnetron ignition. I am having trouble getting it to fire, is there something that I need to change to the wiring to make it fire. The magnetron engine came... View more questions Search
|