Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Is it safe to replacing a lighter gauge wire with a heavier gauge
[ 11 Answers ]
Hi all, One of my baseboard heater (240v)'s wire was broken can I replace it with a heavier gauge wire? Also can different gauge ground wires (copper wire) be connected with a wire-nut? IS THIS SAFE TO DO? OR Will this create a fire hazard?
Connecting 12 gauge and 14 gauge wire
[ 4 Answers ]
Is it ever acceptable to attach 14 gauge to 12 gauge wire? I have a remodel situation where I have a 20 amp/12 gauge wired circuit powering outlets only. I want to tap off the end-of-run outlet to power an electric-venting skylight. The skylight comes with 14/2 wire. Can I tap off the 20 amp...
Connecting 14 gauge wire and 12 gauge wires in the same blue box.
[ 2 Answers ]
I am wiring my basement. All the outlets are running off 2 independent 20 amp circuit breakers connected to each other by 12/2 wire. I wanted to run some stubs off my 12/2 outlets. All each stub would do is run to a small light (max 180 watts) and of course a light switch. Since I ran out...
Jumping
[ 1 Answers ]
I'm 5' 9'' and I can touch 9' 5'' rim and now I'm going to use air alert 3 to try and get me 2 dunk but I'm not sure it will help me enough so if anyone has done air alert before or someone has done a different program with amazing results please tell me
Jumping from one os to other
[ 2 Answers ]
I have two operating systems (win xp &win 98se),I like to know how to jump from winxp to win 98se ,is there any software which can link both View more questions Search
|