Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding a light kit to ceiling fan w/ light & dimmer switch
[ 6 Answers ]
I would like to add a light kit to a ceiling fan(cannot find a name on it) that is currently hooked and working up in our family room - since we moved in 6 years ago (house was built in 1991). I would like this to operate like our bedroom ceiling fan (which already has a light attached) and...
Adding insulation to existing cathedral ceiling
[ 2 Answers ]
I currently have a cathedral ceiling with R-19 insulation plus a radiant barrier draped over the rafters. I would like to upgrade this to R-30, but this is a finished house. The only way I can think of adding insulation would be to either tear down all the ceilings, or take off all the shingles...
Adding a new light with its own pull string to existing light and switch
[ 8 Answers ]
Howdy. I have a 50 year old house where the bathroom light shares a common wall with the back of the master bedroom closet. I want to add a pull string light in the closet and tap the power off the bathroom light. The bathroom light is switched and the power comes first to the light and then...
Adding new light fixtures to existing switch
[ 4 Answers ]
I am trying to add 3 pendant lights to the same switch as a light in the room. The power source runs to the light first, then to the switch. I tapped into the wire from the switch to the light. I connected whites to whites, blacks to blacks, and grounds to grounds. Now the pre-existing light...
Adding lights to existing exterior light circuit
[ 1 Answers ]
I have a light fixture that is flush mounted in the ceiling of an exterior porch, I would like to add two more twin bulb floodlights switched by the existing switch if this is okay to do. If so can I run wiring from the current fixture through conduit along the undersides of the eaves, and if so... View more questions Search
|