Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Use of a you gauge manometer
[ 1 Answers ]
How du I use a u gauge manometer
Changing from non digital thermostat to digital
[ 1 Answers ]
I have an old non digital Honeywell T87F thermostat, gas burner with baseboard water heat. Can I change to a new digital Honewywell RTH230B and how? Thank you
12 gauge Wire Used w/ 14 gauge Outlet
[ 6 Answers ]
Hello, I have a fairly new home I purchased. I am changing my outlets as I am painting the rooms (Laundry Room) and noticed that the previous home owner put in a laundry board (built in) and wired to the nearest outlet on the wall. They used 12 gauge wire to the outlet (from the built in iron...
Failed gass gauge and temperature gauge on 1988 Nissan Pathfinder
[ 1 Answers ]
I have a 1988 Nissan Pathfinder 4x4. The gas gauge and the temperature gauge would stop working at the same time when the car warmed up. They both would come back on periodically and then off again. Currently they have not come back on in about 3 months. How do I fix this problem?
Oil Pressure gauge, going bad?
[ 2 Answers ]
My f-150 has only 77.000 original miles,I'm the 2nd owner. Previous owned said not to freak out when I came to a stop and the oil pressure gauge drops to nothing,that it had always done this. I've put 3,000 miles on it since and it does the same thing with me,but it doesn't seem to be going dry of... View more questions Search
|