Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Craftsman riding mower engine stops when blades are engaged
[ 15 Answers ]
I have a Craftsman 'Garden Tractor', model number: 917.273070. It has a Kohler engine (model number: CV22S, type number: 75534). The engine starts fine and will run without any issues in all gears. However, immediately once I engage the blade clutch the engine begins to stall. If I place the...
Craftsman lawn mower cuts uneven
[ 1 Answers ]
I have a craftsman riding mower with 42 in deck and it cuts uneven I have replaced the deck , mandrills, blades ajustment screws basically everything that goes with the deck and have tried every ajustment possibly know to try and get it to cut evenly also I have all four leveling wheels everything,...
Riding mower sputters & back fires when blades are engaged
[ 2 Answers ]
My 2002 Scotts 1642h lawn tractor stalls sputters chokes & backfires when blades are engaged but will operate at low speed or w choke on and resume running smothly when blades are disengaged. The carb has been cleaned thoroughly, new fuel filter and plug.got any suggestions ?
Craftsman Riding Mower dies when I engage blades
[ 2 Answers ]
I just bought a Craftsman 24HP riding mower 2 months ago. Just today when I was mowing the lawn it died in the middle of cutting. After I disengaged the cutting blades, I was able to re-start it. But every time I rotate the engagement lever the engine dies. The belt/pulleys seem to be working... View more questions Search
|