Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to safely wire aluminum to copper wire
[ 5 Answers ]
I am switching a non-programmable t-stat to a Honeywell 5-2day programmable one that is for baseboard, covectors and fan-forced heaters. The model number is RLV430A. I have a wall Cadet heater so it should be OK. Problem is when I opened the package the wiring on the t-stat is aluminum. ...
Copper or Aluminum wire
[ 2 Answers ]
Hi I just replaced my Suncutter Package system with a Goodman Package system. The question is should I replace the (main power supply to AC disconnect) aluminum wire with copper? Thanks Brian
Can you use Metal Conduit as ground to convert 2 wire to 3 wire?
[ 3 Answers ]
I need to convert an old cinder block house from 2 wire outlets to 3 wire by adding a ground to all outlets. Since the entire house is cinder block, all the circuits from the basement breaker box are in flexible metal conduit and metal outlet boxes... Is it possible to use the metal conduit...
Hampton Bay light - aluminum wire?
[ 1 Answers ]
My Hampton Bay light fixture (sku 141531) has one white and one black wire (stranded 18AWG) which are a silver color. I tried scratching to see if copper is under some coating, and cut a piece off the end to see if the end showed copper, both with no copper showing. Is there a way to confirm if the...
Junction box for #2 aluminum wire
[ 3 Answers ]
I need to join a new 100A feed on #2 aluminum wire to an existing #2 wire running from the panel. So this is actually #2 alum triplex in both cases plus a #8 bare copper ground. The junction will take place in an access panel in the wall where the two PVC conduits meet. What size junction box do... View more questions Search
|