Ask Experts Questions for FREE Help !
Ask
    yaxazaa's Avatar
    yaxazaa Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Sep 23, 2006, 02:07 PM
    Ceiling fan light dimmed
    Hi,

    I have a Hunington Bay Ceiling Fan/light with remote control. Last night the light suddenly dimmed. I exchanged with new light. It's still the same. Wondering if anyone can have some idea to help me fix the problem.

    Thanks,

    Kwang
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Sep 23, 2006, 10:33 PM
    Have you tested the dim function on the remote?
    yaxazaa's Avatar
    yaxazaa Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Sep 24, 2006, 03:40 PM
    Hi,

    There is no dim function in the remote. Have not removed the fan and at this stage, may have no intention to do it. Just want to fix the problem.

    Looking froward to heaing from you.

    Kwang
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Sep 24, 2006, 05:11 PM
    I believe there is a dim function on the remote and it has been activated and perhaps you are not aware of it. I believe you have to hold down the light button.
    yaxazaa's Avatar
    yaxazaa Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Sep 24, 2006, 07:27 PM
    Thanks so much. You are extractly right.

    Thanks,

    Kwang
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Light Kit for Ceiling Fan [ 2 Answers ]

I just bought I Home Essentials ceiling fan from K-MART and I wired the fan portion just fine. The wires were nice and color coded Black to black, red to red, white to white and green to bare copper for the ground wire. I turned on the power and it works fine. When I shut the power back off,...

Ceiling fan/light [ 9 Answers ]

I did away with the remote receiver and wish to use the wall switch only: I have a wall switch labeled "general purpose ceiling fan control - non solid state." Now this switch has one lever that operates the fan from off to high,medium, L1, L2. Below that lever is another lever that operates the...

Light kit for ceiling fan [ 1 Answers ]

I just purchased a Harbor Breeze 52in. Helix II Ceiling fan. The light kit came with the fan. There are 5 G9 blubes that came with the light kit. My problem is that the fan works properly but the lights will not come on. The instructions say to "connect the black wire plug from the fan to the...

HB fan - light dimmed humming [ 3 Answers ]

I have two hampton bay redington IV fans... they have dimmable lights however, when the lights are dimmed they produce a high pitch hum.. any advice?

Hampton Bay ceiling fan/light [ 3 Answers ]

I had to take the fan/light down and in doing so don't remember wiring senario that makes the wall switch work the light portion. There are 4 wires coming down from the ceiling of which 2 are still connected. The wiring for the light is still in tact and marked, neutral, light etc. What wires do I...

View more questions Search