 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Supply lines for baseboard heat
What is the best type of supply line material to furnish the slant fin baseboards(baseline 2000). Some of the runs are 50ft. To the first baseboard. Should these lines be insulated with the foam or rubberized foam wraps. Thanks
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have just started remodeling my kitchen and am looking to move my kitchen sink further down the wall. The kitchen is completely gutted at this point. The supply lines in my house are all brass. I'm looking to stem off the brass lines using copper tubing. Is it possible to cut the brass supply...
And there is no heat in eminating from this baseboard. This was done in one room only and off the original radiator line.the system is all hotwater radiator w/the exception of this one room. We did not change the original heating supply line to this but added valves and then the pex. Seems the hot...
I'm running electric in a house for central air and here's my situation: 2 air handlers in the attic, 2 compressors outside. I want to make sure my work is to code. I know I need separate dedicated branch circuits for each of the 4 appliances. 1) For the air handlers, do I need to run...
Just a question regarding supply lines. I'm pretty sure I'm going with CPVC for the supply side. Planned on making a 3/4" or 1" manifold then branching off that with 3/4" for the main lines with 1/2" for all my fixtures. I have to supply 2 full baths, 1 kitchen and to outside spickets. Can I...
I live in NJ and am remodeling a bath. Can I run my supply lines to the shower in an outside wall? If so any recommendations or hints concerning this?
View more questions Search
|
