Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to pressure-test gas pipe
[ 15 Answers ]
Hi again! First, MANY thanks to you experts for the help I've gotten in the last month. I passed my plumbing inspection for my new bathroom and kitchen! Now, on to one more little one. I'm installing gas lines. The house was previously on oil heat and all other appliances were electric,...
Pipe diameter = poor water pressure?
[ 1 Answers ]
My apartment has low pressure, especially in the shower. It's a loft building in NYC and my unit was renovated in 1985. Others in the building claim to have no issues with pressure. I'm re-doing one bath and the walls have been removed. While the pipes running to the shower area are large, the...
No water pressure after pipe replaced
[ 1 Answers ]
Hi--we had a leak in a hot water pipe in our basement--after the pipe was replaced we have lost our hot water pressure. The pipe is more narrow than the pipe that was originally there, could that be the problem?
Copper to Galvanized
[ 1 Answers ]
I need to replace some water pipes in my house to add Shut-offs and to remove some "hokey" setups.. my issue is that I have galvanized running up through the walls to the 2nd story bathroom. Everything else in the house is copper or PVC. I want to run copper to the galvanized, do I need Dielectric...
Bathroom sink wall pipe drain pipe
[ 2 Answers ]
My house was built in early 70's.. No plastic.. I'm putting in a new sink and had to remove the wall pipe that goes into the wall.. I needed a longer one. It seem where it goes in behind the wall into the plumbing there was some type of gasket as pieces of it fell out when I removed the pipe.. I... View more questions Search
|